HP A5830 Series Command Reference

114
View
MST region view
Default level
2: System level
Parameter
level: Specifies an MSTP revision level, in the range of 0 to 65,535.
Example
# Set the MSTP revision level of the MST region to 5.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] revision-level 5
stp bpdu-protection
Description
Use the stp bpdu-protection command to enable the BPDU guard function.
Use the undo stp bpdu-protection command to disable the BPDU guard function.
By default, the BPDU guard function is disabled.
Syntax
stp bpdu-protection
undo stp bpdu-protection
View
System view
Default level
2: System level
Parameters
None
Example
# Enable the BPDU guard function.
<Sysname> system-view
[Sysname] stp bpdu-protection
stp bridge-diameter
Description
Use the stp bridge-diameter command to specify the network diameter, the maximum possible number of
stations between any two terminal devices on the switched network.
Use the undo stp bridge-diameter command to restore the default.

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English