195
<Sysname> display gvrp status
GVRP is enabled
display gvrp vlan-operation
Description
Use the display gvrp vlan-operation command to display information about dynamic VLAN operations on
a port.
Syntax
display gvrp vlan-operation interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display information about dynamic VLAN operations on GigabitEthernet 1/0/1.
<Sysname> display gvrp vlan-operation interface gigabitethernet 1/0/1
Dynamic VLAN operations on port GigabitEthernet1/0/1
Operations of creating VLAN : 2-100
Operations of deleting VLAN : none
Operations of adding VLAN to TRUNK : 2-100
Operations of deleting VLAN from TRUNK : none
garp timer hold
Description
Use the garp timer hold command to set the GARP Hold timer for an Ethernet port, Layer-2 aggregate
interface, or all ports in a port group.
To Next Page
Loading...
Need help?
General