HP A5830 Series Command Reference

76
Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Layer 2 aggregate interface view
Default level
2: System level
Parameters
None
Example
# Enable linkUp/linkDown trap generation on Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] snmp-agent trap enable
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] enable snmp trap updown
interface bridge-aggregation
Description
Use the interface bridge-aggregation command to create a Layer 2 aggregate interface and enter the
Layer 2 aggregate interface view.
Use the undo interface bridge-aggregation command to remove a Layer 2 aggregate interface.
When you create a Layer 2 aggregate interface, a Layer 2 aggregation group with the same number is
automatically created. If you remove the Layer 2 aggregate interface, you also remove the Layer 2
aggregation group, and any member ports will leave the aggregation group.
Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
View
System view
Default level
2: System level
Parameter
interface-number: Specifies a Layer 2 aggregate interface number, in the range of 1 to 128.
Example
# Create Layer 2 aggregate interface Bridge-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English