HP A5830 Series Command Reference

69
Field
Description
Bridge-Aggregation10 Load-
Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to the aggregate interface Bridge-Aggregation 10.
By default, the global link-aggregation load sharing criteria are
displayed.
If you have configured link-aggregation load sharing criteria especially
for this aggregation group, the configured ones are displayed.
Route-Aggregation10 Load-
Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to aggregate interface Route-Aggregation 10.
By default, the global link-aggregation load sharing criteria are
displayed.
If you have configured link-aggregation load sharing criteria especially
for this aggregation group, the configured ones are displayed.
Layer 2 traffic: destination-mac
address, source-mac address
Default link-aggregation load sharing criteria for Layer 2 traffic. In this
sample output, the criteria are the source and destination MAC
addresses of packets.
Layer 3 traffic: destination-ip
address, source-ip address
Default link-aggregation load sharing criteria for Layer 3 traffic. In this
sample output, the criteria are the source and destination IP addresses
of packets.
destination-mac address, source-
mac address
User-configured link-aggregation load sharing criteria. In this sample
output, the criteria are the source and destination MAC addresses of
packets.
display link-aggregation member-port
Description
Use the display link-aggregation member-port command to display detailed link aggregation information
for the specified member ports. If no port is specified, this command displays detailed link aggregation
information for all member ports.
Only the port number and operational key of a member port in a static aggregation group are displayed,
because the aggregation group is not aware of the partner’s information.
Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include } regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type interface-
number [ to interface-type interface-number ], where interface-type interface-number indicates the port
type and port number.

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English