HP A5830 Series Command Reference

147
Field
Description
Last clearing of counters
Time when the reset counts interface vlan-interface command was
last used to clear the interface statistics.
Never indicates the reset counters interface command has never
been used on the interface since the device’s startup.
Last 300 seconds input: 0 bytes/sec
0 packets/sec
Average rate of input packets in the last 300 seconds (in bps and
pps).
Last 300 seconds output: 0
bytes/sec 0 packets/sec
Average rate of output packets in the last 300 seconds (in bps and
pps).
0 packets input, 0 bytes, 0 drops
Total number and size (in bytes) of the received packets of the
interface and the number of the dropped packets.
0 packets output, 0 bytes, 0 drops
Total number and size (in bytes) of the sent packets of the interface
and the number of the dropped packets.
The brief information of interfaces
under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively down;
Stby - standby
ADM—Interface has been administratively shut down. To recover its
physical state, perform the undo shutdown command.
Stby—Interface is operating as a standby interface. To see the main
interface, use the display standby state command.
Protocol: (s) - spoofing
If the network layer protocol state of an interface is shown as UP, but
its link is an on-demand link or not present at all, its protocol
attribute includes the spoofing flag (an s in parentheses).
Interface
Abbreviated interface name.
Link
Physical link state of the interface:
UP—Link is up.
ADM—Link has been administratively shut down. To recover its
physical state, perform the undo shutdown command.
Protocol
Protocol connection state of the interface, which can be UP,
DOWN, or UP(s).
Main IP
Main IP address of the interface.
Description
Description of the interface.
Cause
Cause of a DOWN physical link. If the port has been shut down
with the shutdown command, this field displays Administratively. To
restore the physical state of the interface, use the undo shutdown
command.
display vlan
Description
Use the display vlan command to display VLAN information.
Related commands: vlan.

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English