HP A5830 Series Command Reference

219
LLDP statistics global Information:
LLDP neighbor information last change time:0 days,0 hours,4 minutes,40 seconds
The number of LLDP neighbor information inserted : 1
The number of LLDP neighbor information deleted : 1
The number of LLDP neighbor information dropped : 0
The number of LLDP neighbor information aged out : 1
LLDP statistics information of port 1 [GigabitEthernet1/0/1]:
The number of LLDP frames transmitted : 0
The number of LLDP frames received : 0
The number of LLDP frames discarded : 0
The number of LLDP error frames : 0
The number of LLDP TLVs discarded : 0
The number of LLDP TLVs unrecognized : 0
The number of LLDP neighbor information aged out : 0
Table 47 Command output
Field
Description
LLDP statistics global information
Global LLDP statistics
LLDP neighbor information last change time
Time the neighbor information was last updated
The number of LLDP neighbor information inserted
Number of times of adding neighbor information
The number of LLDP neighbor information deleted
Number of times of removing neighbor information
The number of LLDP neighbor information dropped
Number of times of dropping neighbor information
due to lack of available memory space
display lldp status
Description
Use the display lldp status command to display LLDP status information.
If no port is specified, this command displays the global LLDP status and the LLDP status information for all
ports.
Syntax
display lldp status [ interface interface-type interface-number ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.

HP A5830 Series Specifications

General

Brand	HP
Model	A5830 Series
Category	Switch
Language	English