221
LLDP mode of the port:
TxRx—Port sends and receives LLDPDUs
Rx_Only— Port only receives LLDPDUs
Tx_Only— Port only sends LLDPDUs
Disable— Port does not send or receive LLDPDUs
Indicates whether trapping is enabled
LLDP polling interval, which is 0 when LLDP polling is disabled
Number of LLDP neighbors connecting to the port
Number of MED neighbors connecting to the port
Number of CDP neighbors connecting to the port
Number of sent optional TLV
Number of optional TLVs contained in an LLDPDU sent through the
port
Number of received unknown TLV
Number of unknown TLVs contained in a received LLDPDU
display lldp tlv-config
Description
Use the display lldp tlv-config command to display the types of advertisable optional LLDP TLVs of a port.
If no port is specified, this command displays the types of advertisable optional TLVs of each port.
Syntax
display lldp tlv-config [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display the types of advertisable optional LLDP TLVs of interface GigabitEthernet 1/0/1.
<Sysname> display lldp tlv-config interface gigabitethernet 1/0/1
To Next Page
Loading...
Need help?
General