83
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the existing
statistics of the interface:
If no keywords or parameter is specified, the command clears the statistics of all interfaces in the
system.
If only the bridge-aggregation parameter is specified, the command clears the statistics of all Layer
2 aggregate interfaces.
If the bridge-aggregation interface-number keyword and parameter combination is specified, the
command clears the statistics of the specified Layer 2 aggregate interface.
The bridge-aggregation parameter becomes available only after you create Layer 2 aggregate
interfaces on the device.
Syntax
reset counters interface [ bridge-aggregation [ interface-number ] ]
View
User view
Default level
2: System level
Parameters
bridge-aggregation: Clears statistics for Layer 2 aggregate interfaces.
interface-number: Specifies an aggregate interface number. If the interface-number parameter is not
specified, this command clears statistics of all aggregate interfaces of the specified type.
Example
# Clear the statistics of Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Description
Use the reset lacp statistics command to clear the LACP statistics on the specified member ports or all
member ports, if no member ports are specified.
Related commands: display link-aggregation member-port.
Syntax
reset lacp statistics [ interface interface-list ]
View
User view
Default level
1: Monitor level
To Next Page
Loading...
Need help?
General