Setting up the receiving server
1. Create a new site on server A.
2. For the vaulting policy template, select Onsite Vaulting, Medium Security.
3. Edit the first policy cycle entry on the vaulting cycle and click the Add Vault
button.
4. Type a name for the vault.
5. Select the Layout tab and click Auto-Create Layout.
6. In the Starting Slot and Ending Slot fields, type valid numbers depending on
your site layout.
7. Select the correct media slot type and click Create.
8. When the site has been created, edit it and click the Remote Accounts tab.
9. Click Add to add a new remote account.
10. Type in a valid username and password. Remember these because you will
need them when you configure the second server.
Setting up the sending server
1. Create a new site on server B.
2. For the vaulting policy template select Slow Recovery Access, High Security.
3. Edit the first policy cycle entry on the vaulting cycle and click the Add On Site
Vendor button.
4. Type a name for the new vendor.
5. Add a new offsite vendor account.
6. In the account ID field enter the account username you specified on the receiving
server (server A).
7. In the Hostname field, enter the TCP/IP hostname of the receiving server.
8. In the account password field, enter the password you specified on the receiving
server.
9. Perform a backup on a backup server to create some protected media that will
need to be vaulted.
10. Add the backup server to this site.
Configuring Media Operations92
To Next Page
Loading...
Need help?
General