105
interface-number: Specifies an aggregate interface number.
Usage guidelines
Use this command to clear history statistics before you collect traffic statistics for a time period.
If you do not specify any options, the command clears statistics for all interfaces in the system.
If you specify only the bridge-aggregation keyword, the command clears statistics for all Layer 2
aggregate interfaces.
If you specify the bridge-aggregation interface-number option, the command clears statistics for
the specified Layer 2 aggregate interface.
The bridge-aggregation keyword is available only when Layer 2 aggregate interfaces exist on the
device.
Examples
# Clear statistics for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Use reset lacp statistics to clear LACP statistics for the specified link aggregation member ports.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ]. The interface-type interface-number
argument specifies an interface by its type and number. If you do not specify any member ports, the
command clears LACP statistics for all member ports.
Examples
# Clear LACP statistics for all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port
shutdown
Use shutdown to shut down an aggregate interface.
Use undo shutdown to bring up an aggregate interface.
Syntax
shutdown
undo shutdown
Views
Layer 2 aggregate interface view
To Next Page
Loading...
Need help?
General