50
Syntax
reset counters interface loopback [ interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a loopback interface by its number, which can be the number of any
existing loopback interface. If you do not specify the interface-number argument, the command
clears the statistics on all loopback interfaces.
Usage guidelines
To determine whether a loopback interface works correctly within a period by collecting the traffic
statistics within that period, first use the reset counters interface [ loopback [ interface-number ] ]
command to clear the statistics. Then have the interface automatically collect the statistics.
This command is available only if at least one loopback interface has been created.
Examples
# Clear the statistics on loopback interface Loopback 1.
<Sysname> reset counters interface loopback 1
Related commands
display interface loopback
reset counters interface null
Use reset counters interface null to clear the statistics on the null interface.
Syntax
reset counters interface [ null [ 0 ] ]
Views
User view
Predefined user roles
network-admin
Parameters
0: Specifies the number of the null interface, which is always 0.
Usage guidelines
To determine whether the null interface works correctly within a period by collecting the traffic
statistics within that period, first use the reset counters interface [ null [ 0 ] ] command to clear the
statistics. Then have the interface automatically collect the statistics.
Examples
# Clear the statistics on interface Null 0.
<Sysname> reset counters interface null 0
Related commands
display interface null
To Next Page
Loading...
Need help?
General