24
If you do not specify an interface type, this command clears statistics for all interfaces.
If you specify only the interface type, this command clears statistics for all interfaces of that type.
If you specify both the interface type and the interface number, this command clears statistics for the
specified interface.
Examples
# Clear the statistics of GigabitEthernet 1/0/1.
<Sysname> reset counters interface gigabitethernet 1/0/1
Related commands
• display interface
• display counters interface
• display counters rate interface
reset ethernet statistics
Use reset ethernet statistics to clear the Ethernet module statistics.
Syntax
reset ethernet statistics slot slot-number
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Clears the Ethernet module statistics on the specified IRF member device. The
slot-number argument represents the ID of the IRF member device.
Examples
# Clear the Ethernet module statistics on IRF member 6.
<Sysname> reset ethernet statistics slot 6
reset packet-drop interface
Use reset packet-drop interface to clear the dropped packet statistics on an interface or multiple
interfaces.
Syntax
reset packet-drop interface [ interface-type [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-type: Specifies an interface type. If you do not specify an interface type, this command
clears dropped packet statistics on all the interfaces on the device.
To Next Page
Loading...
Need help?
General