HP FlexNetwork 5130 HI series User Manual

5
Table 2 Command output
Field Description
Interface Abbreviated interface name.
Total (pkts/sec)
Average rate (in pps) of receiving or sending packets during the statistics
polling interval.
Broadcast (pkts/sec)
Average rate (in pps) of receiving or sending broadcast packets during the
statistics polling interval.
Multicast (pkts/sec)
Average rate (in pps) of receiving or sending multicast packets during the
statistics polling interval.
Overflow: more than 14
decimal digits
The command displays
Overflow
if the data length of a statistical item is
greater than 14 decimal digits.
--: not supported The statistical item is not supported.
Related commands
• flow-interval
• reset counters interface
display ethernet statistics
Use display ethernet statistics to display the Ethernet module statistics.
Syntax
display ethernet statistics slot slot-number
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Displays the Ethernet module statistics on the specified IRF member device. The
slot-number argument represents the ID of the IRF member device.
Examples
# Display the Ethernet module statistics on IRF member 1.
<Sysname>display ethernet statistics slot 1
ETH receive packet statistics:
Totalnum : 28259 ETHIINum : 22328
SNAPNum : 0 RAWNum : 0
LLCNum : 5931 UnknownNum : 0
ForwardNum : 22922 ARP : 0
MPLS : 0 ISIS : 0
ISIS2 : 0 IP : 0
IPV6 : 0
ETH receive error statistics:
NullPoint : 0 ErrIfindex : 0
ErrIfcb : 0 IfShut : 0

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English