HP FlexNetwork 5130 HI series User Manual

193
Table 43 Command output
Field Description
VLAN ID ID of the protocol-based VLAN.
Protocol index Protocol template index.
Protocol type
Protocol type specified by the protocol template.
If you do not specify the protocol type, this field displays
N/A
.
Status
Whether the protocol-based VLAN has taken effect:
• Active—The protocol-based VLAN has taken effect.
• Inactive—The protocol-based VLAN has not taken effect.
Related commands
• display protocol-vlan vlan
• port hybrid protocol-vlan
• protocol-vlan
display protocol-vlan vlan
Use display protocol-vlan vlan to display information about protocol-based VLANs.
Syntax
display protocol-vlan vlan { vlan-id1 [ to vlan-id2 ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan-id1: Specifies a protocol-based VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Specifies a VLAN ID range. Both the vlan-id1 and the vlan-id2 arguments are in
the range of 1 to 4094. The value for the vlan-id2 argument must be equal to or greater than the
value for the vlan-id1 argument.
all: Specifies all protocol-based VLANs.
Examples
# Displays information about all protocol-based VLANs.
<Sysname> display protocol-vlan vlan all
VLAN ID: 2
Protocol index Protocol type
0 IPv4
65535 IPv6
VLAN ID: 3
Protocol index Protocol type
0 IPv4
65535 LLC DSAP 0x11 SSAP 0x22

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English