HP FlexNetwork 5130 HI series User Manual

176
[Sysname-vlan2]
# Create VLAN 4 through VLAN 100.
<Sysname> system-view
[Sysname] vlan 4 to 100
Related commands
display vlan
Port-based VLAN commands
display port
Use display port to display information about hybrid or trunk ports.
Syntax
display port { hybrid | trunk }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hybrid: Specifies hybrid ports.
trunk: Specifies trunk ports.
Examples
# Display information about hybrid ports.
<Sysname> display port hybrid
Interface PVID VLAN Passing
GE1/0/4 100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
# Display information about trunk ports.
<Sysname> display port trunk
Interface PVID VLAN Passing
GE1/0/8 2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Table 39 Command output
Field Description
Interface Interface name.
PVID Port VLAN ID.
VLAN Passing Existing VLANs allowed on the port.
Tagged VLANs from which the port sends packets without removing VLAN tags.

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English