272
Related commands
lldp compliance cdp
lldp compliance cdp
Use lldp compliance cdp to enable CDP compatibility globally.
Use undo lldp compliance cdp to restore the default.
Syntax
lldp compliance cdp
undo lldp compliance cdp
Default
CDP compatibility is globally disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The maximum TTL that CDP allows is 255 seconds. To make CDP-compatible LLDP work correctly
with Cisco IP phones, configure the LLDP frame transmission interval to be no more than 1/3 of the
TTL value.
Examples
# Enable CDP compatibility globally.
<Sysname> system-view
[Sysname] lldp compliance cdp
Related commands
• lldp hold-multiplier
• lldp timer tx-interval
lldp enable
Use lldp enable to enable LLDP on a port.
Use undo lldp enable to disable LLDP on a port.
Syntax
lldp enable
undo lldp enable
Default
LLDP is enabled on a port.
Views
Layer 2 aggregate interface view
Layer 2 Ethernet interface view
Management Ethernet interface view
To Next Page
Loading...
Need help?
General