62
Examples
# Add a static entry for MAC address 000f-e201-0101 on interface GigabitEthernet 1/0/1 that
belongs to VLAN 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-address static 000f-e201-0101 vlan 2
# Add a static entry for MAC address 000f-e201-0101 on Layer 2 aggregate interface
Bridge-Aggregation 1 that belongs to VLAN 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] mac-address static 000f-e201-0102 vlan 1
# Add a multiport unicast MAC address entry for MAC address 0001-0001-0101 on GigabitEthernet
1/0/1 and GigabitEthernet 1/0/2 that belong to VLAN 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-address multiport 0001-0001-0101 vlan 2
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] interface gigabitethernet 1/0/2
[Sysname-GigabitEthernet1/0/2] mac-address multiport 0001-0001-0101 vlan 2
Related commands
• display mac-address
• mac-address (system view)
mac-address (system view)
Use mac-address to add or modify a MAC address entry.
Use undo mac-address to delete one or all MAC address entries.
Syntax
mac-address { dynamic | static } mac-address interface interface-type interface-number vlan
vlan-id
mac-address blackhole mac-address vlan vlan-id
mac-address multiport mac-address interface interface-list vlan vlan-id
undo mac-address [ [ dynamic | static ] mac-address interface interface-type interface-number
vlan vlan-id ]
undo mac-address [ blackhole | dynamic | static ] [ mac-address ] vlan vlan-id
undo mac-address [ dynamic | static ] interface interface-type interface-number
undo mac-address multiport mac-address interface interface-li
st vlan vlan-id
undo mac-address [ multiport ] [ [ mac-address ] vlan vlan-id ]
Default
The system is not configured with MAC address entries.
Views
System view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General