51
shutdown
Use shutdown to shut down a loopback interface.
Use undo shutdown to bring up a loopback interface.
Syntax
shutdown
undo shutdown
Default
A loopback interface is up.
Views
Loopback interface view
Predefined user roles
network-admin
Usage guidelines
Use the shutdown command with caution, because the command disconnects the connection of the
interface and disables the interface from communicating.
Examples
# Shut down interface loopback 1.
<Sysname> system-view
[Sysname] interface loopback 1
[Sysname-LoopBack1] shutdown
To Next Page
Loading...
Need help?
General