HP FlexNetwork 5130 HI series User Manual

170
Table 37 Command output
Field Description
VLAN type VLAN type, static or dynamic.
Route interface
Whether the VLAN interface is configured for the VLAN.
• Not configured.
• Configured.
Description Description of the VLAN.
Name VLAN name.
IPv4 address
Primary IPv4 address of the VLAN interface. This field is
displayed only when an IPv4 address is configured for the VLAN
interface.
When the VLAN interface is also configured with secondary IPv4
addresses, you can view them by using one of the following
commands:
• display interface vlan-interface.
• display this (VLAN interface view).
IPv4 subnet mask
Subnet mask of the primary IP address. This field is available only
when an IP address is configured for the VLAN interface.
Tagged ports Tagged members of the VLAN.
Untagged ports Untagged members of the VLAN.
Related commands
vlan
display vlan brief
Use display vlan brief to display brief VLAN information.
Syntax
display vlan brief
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display brief VLAN information.
<Sysname> display vlan brief
Brief information about all VLANs:
Supported Minimum VLAN ID: 1
Supported Maximum VLAN ID: 4094
Default VLAN ID: 1
VLAN ID Name Port
1 VLAN 0001 GE1/0/1 GE1/0/2 GE1/0/3 GE1/0/4
GE1/0/5 GE1/0/6 GE1/0/7 GE1/0/8

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English