HP FlexNetwork 5130 HI series User Manual

204
Private VLAN commands
display private-vlan
Use display private-vlan to display information about primary VLANs and their associated
secondary VLANs.
Syntax
display private-vlan [ primary-vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
primary-vlan-id: Specifies a primary VLAN ID in the range of 1 to 4094. If you do not specify a primary
VLAN ID, this command displays all primary VLANs and their associated secondary VLANs.
Examples
# Display information about primary VLANs and their associated secondary VLANs.
<Sysname> display private-vlan
Primary VLAN ID: 2
Secondary VLAN ID: 3-4
VLAN ID: 2
VLAN type: Static
Private VLAN type: Primary
Route interface: Configured
IPv4 address: 1.1.1.1
IPv4 subnet mask: 255.255.255.0
IPv6 global unicast addresses:
2001::1, subnet is 2001::/64 [TENTATIVE]
Description: VLAN 0002
Name: VLAN 0002
Tagged ports: None
Untagged ports:
GigabitEthernet1/0/2 GigabitEthernet1/0/3 GigabitEthernet1/0/4
VLAN ID: 3
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0003
Name: VLAN 0003
Tagged ports: None
Untagged ports:

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English