HP FlexNetwork 5130 HI series User Manual

85
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 10
Bridge-Aggregation10 Load-Sharing Mode:
destination-mac address source-mac address
Table 19 Command output
Field Description
Link-Aggregation Load-Sharing
Algorithm
Per-flow load sharing algorithm for Ethernet link aggregation.
By default, this field displays
Default
. If you have configured the
load sharing algorithm, this field displays the configured
algorithm.
Link-Aggregation Load-Sharing Seed
Per-flow load sharing algorithm seed for Ethernet link
aggregation.
By default, this field displays
Default
. If you have configured the
load sharing algorithm seed, this field displays the configured
seed.
Link-Aggregation Load-Sharing Mode
Global link-aggregation load sharing mode.
• By default, this field displays the link-aggregation load
sharing modes for Layer 2 traffic and Layer 3 traffic.
• If you have set the global link-aggregation load sharing
mode, this field displays the configured mode.
Bridge-Aggregation10 Load-Sharing
Mode
Link-aggregation load sharing mode of Layer 2 aggregation group
10.
• By default, this field displays the global link-aggregation load
sharing modes.
• If you have set a link-aggregation load sharing mode for this
aggregation group, this field displays the configured mode.
Layer 2 traffic: packet type-based
sharing
Default link-aggregation load sharing mode for Layer 2 traffic. In
this sample output, Layer 2 traffic is load shared based on the
packet type.
Layer 3 traffic: packet type-based
sharing
Default link-aggregation load sharing mode for Layer 3 traffic. In
this sample output, Layer 3 traffic is load shared based on the
packet type.
destination-mac address, source-mac
address
User-configured link-aggregation load sharing mode. In this
sample output, traffic is load shared based on source and
destination MAC addresses.
Related commands
• link-aggregation global load-sharing algorithm
• link-aggregation global load-sharing mode
• link-aggregation global load-sharing seed
• link-aggregation load-sharing mode
display link-aggregation member-port
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports.
Syntax
display link-aggregation member-port [ interface-list ]

HP FlexNetwork 5130 HI series Specifications

General

Brand	HP
Model	FlexNetwork 5130 HI series
Category	Switch
Language	English