90
--------------------------------------------------------------------------------
GE1/0/1 S 32768 2 {ACDEF}
GE1/0/2 S 32768 2 {ACDEF}
Remote:
Actor Partner Priority Oper-Key SystemID Flag
--------------------------------------------------------------------------------
GE1/0/1 1 32768 2 0x8000, 000f-e267-57ad {ACDEF}
GE1/0/2 2 32768 2 0x8000, 000f-e267-57ad {ACDEF}
# Display detailed information about Layer 2 aggregation group 20, which is a static aggregation
group.
<Sysname> display link-aggregation verbose bridge-aggregation 20
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected, I -- Individual
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation20
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Priority Oper-Key
--------------------------------------------------------------------------------
GE1/0/1 U 32768 1
GE1/0/2 U 32768 1
GE1/0/3 U 32768 1
Table 22 Command output
Field Description
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Port Status Port state: Selected, Unselected, or Individual.
Flags
LACP state flags. This field is one byte long, represented by ABCDEFGH from
the least significant bit to the most significant bit. The letter is present when its bit
is 1 and absent when its bit is 0.
• A—Indicates whether LACP is enabled. 1 indicates enabled, and 0 indicates
disabled.
• B—Indicates the LACP short or long timeout. 1 indicates short timeout, and
0 indicates long timeout.
• C—Indicates whether the sending system considers that the link is
aggregatable. 1 indicates yes, and 0 indicates no.
• D—Indicates whether the sending system considers that the link is
synchronized. 1 indicates yes, and 0 indicates no.
• E—Indicates whether the sending system considers that the incoming
frames are collected. 1 indicates yes, and 0 indicates no.
• F—Indicates whether the sending system considers that the outgoing
frames are distributed. 1 indicates yes, and 0 indicates no.
• G—Indicates whether the sending system receives frames in default state. 1
indicates yes, and 0 indicates no.
• H—Indicates whether the sending system receives frames in expired state.
1 indicates yes, and 0 indicates no.
To Next Page
Loading...
Need help?
General