HP GbE2c - Blc Layer 2/3 Fiber SFP Option User Manual

Configuring the switch 161
IP Static Routes Configuration
NOTE: This form is available only on the GbE2c Layer 2/3 Ethernet Blade Switch.
To display the following form, select Layer 3 > Network Routes (click the underlined text, not the folder).
This form summarizes static route parameters.
The following table describes IP Static Routes Configuration controls:
Table 130 IP Static Routes Configuration controls
Control Description
Search Operation To focus the search for an IP static route, enter search parameters:
• Static Route ID
• Destination IP address and subnet mask
• Gateway IP address and subnet mask
Fields that have a value of “any” are ignored during the search.
Choose a search operation:
• or: Search for IP static routes specified in the Search range that meet any of the criteria
entered.
• and: Search for IP static routes specified in the Search range that meet all of the criteria
entered.
Click Search to display IP static routes that fit the range and meet the criteria entered.

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Specifications

General

Brand	HP
Model	GbE2c - Blc Layer 2/3 Fiber SFP Option
Category	Switch
Language	English