HP MSR4080 User Manual

140
display poe-power
Use display poe-power to display PoE power information.
Syntax
Distributed devices in standalone mode/centralized devices in standalone mode:
display poe-power
Distributed devices in IRF mode:
display poe-power [ chassis chassis-number ]
Centralized devices in IRF mode:
display poe-power [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
chassis chassis-number: Specifies an IRF member device by its member ID. If you do not specify a
member device, the command displays information about all PoE power supplies and PSEs in the IRF
fabric. (Distributed devices in IRF mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, the command displays information about all PSEs in the IRF fabric. (Centralized devices in IRF
mode.)
Examples
# Display PoE power information.
<Sysname> display poe-power
PoE Current Power : 1870 W
PoE Average Power : 2100 W
PoE Peak Power : 2350 W
PoE Max Power : 2000 W
PoE Nominal Power : 2500 W
PoE Current Electric Current : 3.00 A
PoE Current Voltage : 55.00 V
PoE Lower Input Threshold : 111.22 V
PoE Upper Input Threshold : 131.00 V
PoE Lower Output Threshold : 45.00 V
PoE Upper Output Threshold : 57.00 V
PoE Hardware Version : 0002
PoE Software Version : 0001
PoE Power Supplies : 2
PoE Power Supply 1:
Manufacturer : Tyco Electronics Com
Type : PSE2500-A

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English