386
IPv6 NetStream commands
Commands and descriptions for centralized devices apply to the following routers:
• MSR1002-4/1003-8S.
• MSR2003.
• MSR2004-24/2004-48.
• MSR3012/3024/3044/3064.
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
display ipv6 netstream cache
Use display ipv6 netstream cache to display IPv6 NetStream entry information.
Syntax
Centralized devices in standalone mode:
display ipv6 netstream cache [ verbose ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display ipv6 netstream cache [ slot slot-number ] [ verbose ]
Distributed devices in IRF mode:
display ipv6 netstream cache [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command displays
information about IPv6 NetStream entries for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information about IPv6 NetStream entries for all member devices.
(Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the member ID of the IRF member device. The slot-number argument represents the
slot number of the card. If you do not specify a card, this command displays information about IPv6
NetStream entries for all cards. (Distributed devices in IRF mode.)
verbose: Displays detailed information about IPv6 NetStream entries.
Examples
# (Centralized devices in standalone mode.) Display detailed information about IPv6 NetStream entries.
To Next Page
Loading...
Need help?
General
