To Next Page

To Previous Page

175

Syntax

enable snmp trap updown

undo enable snmp trap updown

Default

Link state notifications are enabled.

Views

Interface view

Predefined user roles

network-admin

Usage guidelines

For an interface to generate linkUp/linkDown notifications when its state changes, you must also enable

the linkUp/linkDown notification function globally by using the snmp-agent trap enable standard

[ linkdown | linkup ] * command.

Examples

# Enable GigabitEthernet 2/0/1 to send linkUp/linkDown SNMP traps to 10.1.1.1 in the community

public.

<Sysname> system-view

[Sysname] snmp-agent trap enable

[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params securityname

public

[Sysname] interface gigabitethernet 2/0/1

[Sysname-GigabitEthernet2/0/1] enable snmp trap updown

Related commands

• snmp-agent target-host

• snmp-agent trap enable

snmp-agent

Use snmp-agent to enable the SNMP agent.

Use undo snmp-agent to disable the SNMP agent.

Syntax

snmp-agent

undo snmp-agent

Default

The SNMP agent is disabled.

Views

System view

Predefined user roles

network-admin

HP MSR4080 User Manual

Other manuals for HP MSR4080