HP MSR4080 User Manual

209
Table 47 Command output
Field Descri
p
tion
EventEntry entry-number
owned by owner is status.
Event entry owner and status:
• entry-number—Event entry index (MIB object eventIndex).
• owner—Entry owner (MIB object eventOwner).
• status—Entry status (MIB object eventStatus):
{ VALID—The entry is valid.
{ UNDERCREATION—The entry is invalid.
The status field is not configurable at the CLI. All alarm entries created from the
CLI are valid by default.
The display rmon event command can display invalid entries, but the display
current-configuration and display this commands do not display their settings.
Description Event description (MIB object eventDescription).
Community
SNMP community name for the RMON event (MIB object eventCommunity). You
can specify an SNMP community name when you create an RMON event entry,
but the setting does not take effect. The system always uses the settings
configured with the SNMP feature when it sends RMON event notifications.
Take the action action when
triggered
Actions that the system takes when the event occurs (MIB object eventType):
• none—Takes no action.
• log—Logs the event.
• trap—Sends an SNMP notification.
• log-trap—Logs the event and sends an SNMP notification.
last triggered at
time uptime
Last time when the event occurred, which is represented as the amount of time
that elapsed since the system startup. The MIB object for this field is
eventLastTimeSent.
Related commands
rmon event
display rmon eventlog
Use display rmon eventlog to display event log entries.
Syntax
display rmon eventlog [ entry-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
entry-number: Specifies an event entry index in the range of 1 to 65535. If you do not specify an entry,
the command displays log entries for all event entries.

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English