262
Predefined user roles
network-admin
Parameters
integer-value: Specifies a reference value. The value is an integer.
Usage guidelines
The Boolean test uses the reference value to compare with the sampled value.
Examples
# Set the reference value to 5 for the Boolean test.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] test boolean
[Sysname-trigger-owner1-triggerA-boolean] value 5
Related commands
• snmp mib event trigger
• startup
• test
wildcard context (action-set view)
Use wildcard context to enable the context of the set action to be wildcarded.
Use undo wildcard context to restore the default.
Syntax
wildcard context
undo wildcard context
Default
The context of the set action is fully specified.
Views
Action-set view
Predefined user roles
network-admin
Usage guidelines
This command must be used in conjunction with the context command. A wildcarded context has two
parts: the context specified by the context command and the wildcarded part.
Examples
# Enable the context contextname1 of the set action to be wildcarded.
<Sysname>system-view
[Sysname] snmp mib event owner owner1 name EventA
[Sysname-event-owner1-EventA] action set
[Sysname-event-owner1-EventA-set] context contextname1
[Sysname-event-owner1-EventA-set] wildcard context
To Next Page
Loading...
Need help?
General
