HP MSR4080 User Manual

200
snmp-agent usm-user v3
Use snmp-agent usm-user v3 to add a user to an SNMPv3 group or create an SNMPv3 user.
Use undo snmp-agent usm-user v3 to delete a user from an SNMPv3 group or remove an SNMPv3 user.
Syntax
Non-FIPS mode (in VACM mode):
snmp-agent usm-user v3 user-name group-name [ remote { ip-address | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] ] [ { cipher | simple } authentication-mode { md5 | sha }
auth-password [ privacy-mode { aes128 | 3des | des56 } priv-password ] ] [ acl { acl-number | name
acl-name } | acl ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote { ip-address | ipv6
ipv6-address } [ vpn-instance vpn-instance-name ] }
Non-FIPS mode (in RBAC mode):
snmp-agent usm-user v3 user-name user-role role-name [ re
mote { ip-addr
ess | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] ] [ { cipher | simple } authentication-mode { md5 | sha }
auth-password [ privacy-mode { aes128 | 3des | des56 } priv-password ] ] [ acl { acl-number | name
acl-name } | acl ipv6 { ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote { ip-address | ipv6
ipv6-address } [ vpn-instance vpn-instance-name ] }
FIPS mode (in VACM mode):
snmp-agent usm-user v3 user-name group-name [ remote { ip-address | ipv6 ipv6-address }
[ vpn-instance vpn
-
instance-name ] ] { cipher | simple } authentication-mode sha auth-password
[ privacy-mode aes128 priv-password ] [ acl { acl-number | name acl-name } | acl ipv6
{ ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote { ip-address | ipv6
ipv6-address } [ vpn-instance vpn-instance-name ] }
FIPS mode (in RBAC mode):
snmp-agent usm-user v3 user-name user-role role-name [ remote { ip-address | ipv6 ipv6-address }
[ vpn-instance vpn-instance-name ] ] [ { cipher | simple } authentication-mode sha auth-password
[ privacy-mode aes
128 pr
iv-password ] ] [ acl { acl-number | name acl-name } | acl ipv6
{ ipv6-acl-number | name ipv6-acl-name } ] *
undo snmp-agent usm-user v3 user-name { local | engineid engineid-string | remote { ip-address | ipv6
ipv6-address } [ vpn-instance vpn-instance-name ] }
Default
No SNMPv3 users are configured.
Views
System view
Predefined user roles
network-admin
Parameters
user-name: Specifies an SNMPv3 username, a case-sensitive string of 1 to 32 characters.

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English