48
Syntax
out interface interface-type interface-number
undo out interface
Default
The output interface for probe packets is not specified. The NQA client determines the output interface
based on the routing table lookup.
Views
DHCP operation view, ICMP echo operation view, UDP tracert operation view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
For successful operation, the specified output interface must be up.
If the next-hop command is configured for an ICMP echo operation, the out interface command does not
take effect.
Examples
# Specify GigabitEthernet 2/0/1 as the output interface for probe packets in the UDP tracert operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-tracert
[Sysname-nqa-admin-test-udp-tracert] out interface gigabitethernet 2/0/1
password
Use password to specify the FTP or HTTP login password.
Use undo password to remove the configuration.
Syntax
password { cipher | simple } password
undo password
Default
No FTP or HTTP login password is configured.
Views
FTP/HTTP operation view
Predefined user roles
network-admin
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
To Next Page
Loading...
Need help?
General
