HP MSR4080 User Manual

159
Parameters
group-name: Specifies an SNMPv1, SNMPv2c, or SNMPv3 group name in non-FIPS mode, and an
SNMPv3 group name for high encryption in FIPS mode. It is a case-sensitive string of 1 to 32 characters.
If no group is specified, this command displays information about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonvolatile
ACL name: testacl
Table 32 Command output
Field Descri
p
tion
Group name SNMP group name.
Security model
Security model of the SNMP group:
• authPriv—authentication with privacy.
• authNoPriv—authentication without privacy.
• noAuthNoPriv—no authentication, no privacy.
Security model of an SNMPv1 or SNMPv2c group can only be noAuthNoPriv.
Readview Read-only MIB view accessible to the SNMP group.
Writeview Write MIB view accessible to the SNMP group.
Notifyview
Notify MIB view for the SNMP group. The SNMP users in the group can send notifications
only for the nodes in the notify MIB view.
Storage-type
Storage type, including volatile, nonvolatile, permanent, readOnly, and other (see Table
31).
ACL
Number of the ACL that controls the access of the NMSs in the SNMP group to the device.
This field appears only when an ACL is assigned to the SNMP group. It is exclusive with the
ACL name field.
ACL name
Name of the ACL that controls the access of the NMSs in the SNMP group to the device.
This field appears only when an ACL is assigned to the SNMP group. It is exclusive with the
ACL field.
Related commands
snmp-agent group
display snmp-agent local-engineid
Use display snmp-agent local-engineid to display the local SNMP engine ID.
Syntax
display snmp-agent local-engineid

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English