44
nqa
Use nqa to create an NQA operation and enter its view.
Use undo nqa to remove the operation.
Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
Default
No NQA operation is created.
Views
System view
Predefined user roles
network-admin
Parameters
admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag.
The admin-name argument represents the name of the administrator who creates the NQA operation.
The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive
string of 1 to 32 characters that cannot contain hyphens (-).
all: Removes all NQA operations.
Usage guidelines
If the operation type has been configured for the operation, the command directly places you to NQA
operation view.
Examples
# Create an NQA operation with administrator name admin and operation tag test, and enter NQA
operation view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]
nqa agent enable
Use nqa agent enable to enable the NQA client.
Use undo nqa agent enable to disable the NQA client and stop all operations being performed.
Syntax
nqa agent enable
undo nqa agent enable
Default
The NQA client is enabled.
To Next Page
Loading...
Need help?
General
