309
Process monitoring and maintenance
commands
Commands and descriptions for centralized devices apply to the following routers:
• MSR1002-4/1003-8S.
• MSR2003.
• MSR2004-24/2004-48.
• MSR3012/3024/3044/3064.
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
The display memory, display process, display process cpu, monitor process and monitor thread
commands display information about both processes and kernel threads. In these commands, "process"
refers to both processes and kernel threads.
display exception context
Use display exception context to display context information for process exceptions.
Syntax
Centralized devices in standalone mode:
display exception context [ count value ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display exception context [ count value ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display exception context [ count value ] [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
count value: Specifies the number of context information entries, in the range of 1 to 20. The default
value is 1.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the command
displays context information for process exceptions on the active MPU. (Distributed devices in standalone
mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the command
displays context information for process exceptions on the IRF master device. (Centralized devices in IRF
mode.)
To Next Page
Loading...
Need help?
General
