53
Predefined user roles
network-admin
Parameters
timeout: Specifies the probe timeout time in milliseconds. Available value ranges include:
• 10 to 86400000 for the FTP or HTTP operation.
• 10 to 3600000 for the DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, UDP echo, or UDP tracert
operation.
Usage guidelines
If a probe does not complete within the period, the probe is timed out.
Examples
# Set the probe timeout time to 10000 milliseconds for the DHCP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] probe timeout 10000
raw-request
Use raw-request to enter raw-request view and specify the content of an HTTP request.
Use undo raw-request to delete the content of an HTTP request.
Syntax
raw-request
undo raw-request
Default
No contents are specified.
Views
HTTP operation view
Predefined user roles
network-admin
Usage guidelines
This command places you in raw request view and deletes the content of the previously configured GET
request.
Examples
# Enter raw request view and specify the content of a request for the HTTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] raw-request
[Sysname-nqa-admin-test-http-raw-request]
To Next Page
Loading...
Need help?
General
