266
NETCONF commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
netconf soap http enable
Use netconf soap http enable to enable NETCONF over SOAP over HTTP.
Use undo netconf soap http enable to disable NETCONF over SOAP over HTTP.
Syntax
netconf soap http enable
undo netconf soap http enable
Default
NETCONF over SOAP over HTTP is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command is not available in FIPS mode.
This command enables the device to resolve NETCONF messages that are encapsulated with SOAP in
HTTP packets.
Examples
# Enable NETCONF over SOAP over HTTP.
<Sysname> system-view
[Sysname] netconf soap http enable
netconf soap https enable
Use netconf soap https enable to enable NETCONF over SOAP over HTTPS.
Use undo netconf soap https enable to disable NETCONF over SOAP over HTTPS.
Syntax
netconf soap https enable
undo netconf soap https enable
Default
NETCONF over SOAP over HTTPS is disabled.
To Next Page
Loading...
Need help?
General
