HP MSR4080 User Manual

335
<Sysname> display process memory heap job 1 size 16
0xb7e300c0 0xb7e300d0 0xb7e300e0 0xb7e300f0
0xb7e30100 0xb7e30110 0xb7e30120 0xb7e30130
0xb7e30140 0xb7e30150 0xb7e30160 0xb7e30170
0xb7e30180 0xb7e30190 0xb7e301a0 0xb7e301b0
0xb7e301c0 0xb7e301d0 0xb7e301e0 0xb7e301f0
0xb7e30200 0xb7e30210 0xb7e30220 0xb7e30230
# Display the addresses of 16-byte memory blocks starting from the fifth block used by process job 1.
<Sysname> display process memory heap job 1 size 16 offset 4
0xb7e30100 0xb7e30110 0xb7e30120 0xb7e30130
0xb7e30140 0xb7e30150 0xb7e30160 0xb7e30170
0xb7e30180 0xb7e30190 0xb7e301a0 0xb7e301b0
0xb7e301c0 0xb7e301d0 0xb7e301e0 0xb7e301f0
0xb7e30200 0xb7e30210 0xb7e30220 0xb7e30230
Related commands
• display process memory heap
• display process memory heap address
exception filepath
Use exception filepath to specify the directory for saving core files.
Use undo exception filepath to remove the specified directory.
Syntax
exception filepath directory
undo exception filepath directory
Default
The core files are saved in the root directory of the storage media.
Views
User view
Predefined user roles
network-admin
Parameters
directory: Specifies the directory for saving core files, which can only be the root directory of the flash
memory or a CF card on the active MPU.
Usage guidelines
If no folder exists in the root directory of the flash memory or a CF card, the system performs the following
operations:
1. Creates a folder for saving core files.
2. Saves core files to the folder.
You can use the command to change the directory on the active MPU and the standby MPU.
If no directory is specified or the specified directory is not accessible, the system cannot store core files.

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English