37
undo frequency
Default
In NQA operation view, the interval between two consecutive voice or path jitter operations is 60000
milliseconds. The interval between two consecutive operations of other types is 0 milliseconds. Only one
operation is performed.
Views
Any NQA operation view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval between two consecutive operations, in the range of 0 to 604800000
milliseconds. An interval of 0 milliseconds sets NQA to perform the operation only once, and not to
generate any statistics.
Usage guidelines
If an operation is not completed when the interval is reached, the next operation does not start.
Examples
# Configure the ICMP echo operation to repeat at an interval of 1000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] frequency 1000
history-record enable
Use history-record enable to enable the saving of history records for the NQA operation.
Use undo history-record enable to disable the saving of history records.
Syntax
history-record enable
undo history-record enable
Default
The saving of history records is enabled only for the UDP tracert operation.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view
ICMP/UDP echo operation view
UDP tracert operation view
Predefined user roles
network-admin
Usage guidelines
To display the history records of the NQA operation, use the display nqa history command.
To Next Page
Loading...
Need help?
General
