425
info-center diagnostic-logfile frequency
Use info-center diagnostic-logfile frequency to configure the interval at which the system saves
diagnostic logs from the diagnostic log file buffer to the diagnostic log file.
Use undo info-center diagnostic-logfile frequency to restore the default saving interval.
Syntax
info-center diagnostic-logfile frequency freq-sec
undo info-center diagnostic-logfile frequency
Default
The diagnostic log file saving interval is 86400 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
freq-sec: Specifies the interval (in seconds) at which the system saves diagnostic logs from the diagnostic
log file buffer to the diagnostic log file. The value range is 10 to 86400.
Usage guidelines
The system outputs diagnostic logs to the diagnostic log file buffer, and then saves the buffered logs to the
diagnostic log file at the specified interval.
Examples
# Set the diagnostic log file saving interval to 600 seconds.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile frequency 600
Related commands
info-center diagnostic-logfile enable
info-center diagnostic-logfile quota
Use info-center diagnostic-logfile quota to set the maximum size for the diagnostic log file.
Use undo info-center diagnostic-logfile quota to restore the default.
Syntax
info-center diagnostic-logfile quota size
undo info-center diagnostic-logfile quota
Default
The maximum size for the diagnostic log file is 5 MB.
Views
System view
To Next Page
Loading...
Need help?
General
