378
Related commands
• ip netstream aggregation
• ip netstream export source
ip netstream export rate
Use ip netstream export rate to limit the NetStream data export rate.
Use undo ip netstream export rate to restore the default.
Syntax
ip netstream export rate rate
undo ip netstream export rate
Default
The export rate of NetStream data is not limited.
Views
System view
Predefined user roles
network-admin
Parameters
rate: Specifies the maximum number of packets to be exported per second. The value range is 1 to 1000.
Examples
# Allow a maximum of 10 packets to be exported per second.
<Sysname> system-view
[Sysname] ip netstream export rate 10
ip netstream export source
Use ip netstream export source to specify the source interface for data packets sent to the NetStream
servers. The IP address of the interface is used as the source IP of the data packets.
Use undo ip netstream export source to remove the configuration.
Syntax
ip netstream export source interface interface-type interface-number
undo ip netstream export source
Default
No source interface is specified for NetStream data packets. The packets take the primary IP address of
the output interface as the source IP address.
Views
System view, NetStream aggregation mode view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General
