HP MSR4080 User Manual

306
undo rtm scheduler suspend
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command disables all CLI-defined and Tcl-defined monitor policies except for the monitor policies
that are running.
To revise the Tcl script of a policy, you must suspend all monitor policies first, and then resume the policies
after you finish revising the script. The system cannot execute a Tcl-defined policy if you edit its Tcl script
without suspending all monitor policies.
Examples
# Suspend monitor policies.
<Sysname> system-view
[Sysname] rtm scheduler suspend
rtm tcl-policy
Use rtm tcl-policy to create a Tcl-defined policy and bind it to a Tcl script file.
Use undo rtm tcl-policy to delete a Tcl policy.
Syntax
rtm tcl-policy policy-name tcl-filename
undo rtm tcl-policy policy-name
Default
No Tcl policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a policy name, a case-sensitive string of 1 to 63 characters.
tcl-filename: Specifies a .tcl script file name. The file name is case sensitive. You must make sure the file
is available on a storage medium of the device. For a distributed device or an IRF fabric of distributed
devices, make sure the script file is saved on all MPUs. This practice ensures that the policy can run
correctly after a master/subordinate or active/standby switchover.
Usage guidelines
Use this command to configure a monitor policy in Tcl.
This command both creates and enables the specified Tcl-defined monitor policy. To revise the Tcl script
of a Tcl-defined policy, you must suspend all monitor policies first, and then resume the policies after you
finish revising the script.

HP MSR4080 Specifications

General

Brand	HP
Model	MSR4080
Category	Network Router
Language	English