Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
427
Figure 6-145 Appearance of the 8-Port 10GBase LAN/WAN-XFP Integrated Line Processing
Unit
The 8-Port 10GBase LAN/WAN-XFP Integrated Line Processing Unit supports the oversubscription
mode. The left-most four ports can be converged to 20 Gbit/s in average. The right-most four ports can
be converged to 20 Gbit/s in average.
Panel
Figure 6-146shows the panel appearance of the 8-Port 10GBase LAN/WAN-XFP Integrated
Line Processing Unit. Table 6-398 describes the indicators on the panel.
Figure 6-146 Panel appearance of the 8-Port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Table 6-398 Indicators on the panel of the 8-Port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Component
Description
OFL button
It is a button indicating the removal of a board. Before removing a
board, you need to press and hold the OFL button for about five
seconds till the OFL indicator is on.
OFL indicator
(red)
If the indicator is on, you can remove the board.
RUN indicator
(green)
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
L/A (green)
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English