Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
529
Figure 6-193 Panel appearance of the 12-port 10/100/1000Base-RJ45 FPIC
Table 6-550 Indicators on the panel of the 12-port 10/100/1000Base-RJ45 FPIC
Indicator
Description
STATUS
indicator (green)
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
LINK
(green)/ACT
indicator (yellow)
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
Interface Attributes
Table 6-551 lists the interface attributes of the 12-port 10/100/1000Base-RJ45 FPIC.
Table 6-551 Interface attributes of the 12-port 10/100/1000Base-RJ45 FPIC
Attributes
Description
Connector type
RJ45
Working mode
10M/100M/1000M auto-sensing and half-duplex and full-duplex
Cable specification
Category 5 unshielded twisted pair (UTP) cable recommended when
the interface works at 10 Mbit/s or 100 Mbit/s; super category 5
Shielded Twisted Pair (STP) cable recommended when the interface
works at 1000 Mbit/s..
Frame format
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English