P50 15″ Display, P70 17″ Display, P200 and P201 20″ Displays
P50 15″ display with a maximum viewable image size of 345 mm (13.6 inches) measured diagonally.
P70 17″ display with a maximum viewable image size of 403 mm (15.9 inches) measured diagonally.
P200 20″ display with a maximum viewable image size of 486 mm (19.1 inches) measured diagonally.
P201 20″ display with a maximum viewable image size of 486 mm (19.1 inches) measured diagonally.
Dimensions
P50 display
Height 374 mm 14.7 in
Width 368 mm 14.5 in
Depth 390 mm 15.3 in
P70 display
Height 414 mm 16.3 in
Width 406 mm 15.9 in
Depth 453 mm 17.8 in
P200 and P201
display
Height 474 mm 18.6 in
Width 474 mm 18.6 in
Depth 505 mm 19.9 in
Weight
P50 14.0 kg 30.8 lbs
P70 23.0 kg 50.6 lbs
P200 30.0 kg 66.3 lbs
P201 31.5 kg 69.4 lbs
Electrical
Power source loading .38
(typical in kVA)
Voltage range (V ac) 100 to 120 or 200 to 240 (autoranging)
Frequency (hertz) 50 or 60
Thermal output
(typical)
480 Btu/hr
Power requirements
(typical)
P50=110 watts, P70=140 watts P200=140 watts, P201=150 watts
Power factor 0.85
Maximum altitude 3048 m (10000 ft.)
Temperature
Requirements
Operating
10 to 40°C
(50 to 104°F)
Non-Operating
0 to 60°C
(32 to 140°F)
Humidity
Requirements
Operating Non-Operating
(Noncondensing) 8 to 80 % 5 to 90 %
Noise Emissions* Operating Idle
L
WAd
3.5 bels 3.5 bels
Clearances Front Back Left Right
152mm (6 in) 152mm (6 in) 152mm (6 in) 152mm (6 in)
Service Install so that air vents are not blocked.
* See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
224 Site and Hardware Planning Information
To Next Page
Loading...
Need help?
General