PDU
Feature
Code
Power Cord
Feature
Code
PDU Plug
Power Cord
Receptacle to PDU
Power Cord Plug to
Wall
Standard
Compliance or
Type
9171
6171
9176
7176
9822
Wilco Weatherproof
WIP130
250 V, 30 A
9171
6171
9176
7176
9826
PDL Insulated
56PA330
250 V, 30 A
9171
6171
9176
7176
9835
Korean Standard
KS C 8305-1990
250 V, 30 A
Rack-Type System Internal Power Distribution Cable
The ac power distribution from PDUs to system components is accomplished with cords using IEC
320/C14 plugs. Additional cords for customer-installed equipment can be provided by feature code 6095.
Voltage from the PDU will be 200 to 240 volts as provided by the customer’s ac power system. The plug
and output connector for power cable feature code 6095 are shown in the following table.
Feature Code Plug Standard Compliance or Type
6095
IEC 320/C14
250 V, 10 A
This plug is used for all power outlets from a PDU.
IEC 320/C13
250 V, 10 A
For connection to customer installed equipment
Chapter 11. Power Cords and Electrical Needs 345
To Next Page
Loading...
Need help?
General