7207 Model 122 4GB External SIRS 1/4-Inch Cartridge Tape Drive
Dimensions
Height 55 mm 2.2 in.
Width 250 mm 9.8 in.
Depth 275 mm 10.8 in.
Weight 3.4kg 7.5 lbs
Electrical
Power source loading 0.03 @ 120 V ac
(typical in kVA)
Voltage range (V ac) 100 to 125 or 200 to 240 (autoranging)
Frequency (hertz) 50 or 60
Thermal output
(typical)
76 Btu/hr
Power requirements
(typical)
22 watts
Power Factor 0.3 to 0.6
Maximum altitude 2135 m (7000 ft.)
Temperature
Requirements
Operating
5 to 45°C
(41 to 113°F)
Non-Operating
-40 to 60°C
(-40 to 140°F)
Humidity
Requirements
Operating Non-Operating
(Noncondensing) 8 to 80% 10 to 90%
Wet Bulb 26°C (79°F) 29°C (84°F)
Noise Emissions¹ Operating Idle
L
WAd
6.6 bels 5.3 bels
L
pAm
N/A N/A
<L
pA
>
m
46 dBA 40 dBA
Impulsive or
prominent discrete
tones
No No
Clearances Front Back Left Right
Install/Air Flow² 152 mm(6 in) 152 mm(6 in) N/A N/A
Service 152 mm(6 in) N/A N/A N/A
Footprint
2
Width
250mm(9.8 in)
Depth
579mm(22.8 in)
1. See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
2. The amount of space needed by the unit during normal operation is indicated by the footprint dimensions.
Chapter 8. Physical Characteristics of the 7200 Series 297
To Next Page
Loading...
Need help?
General