Chapter 5 Function Code Table
- 90 -
Function
Code
Parameter Name Description Setting Range Default
Group F4: Reserved
Group FF: Auxiliary Parameters in Level-III Menu
FF.00
Level-III menu
password
It is used to set the password for viewing and modifying
the level-III menu parameters. If it is set to a non-zero
value, input this password when entering the level-
III menu. If the password is input incorrectly for three
consecutive times, the menu is locked. In this case,
you need to re-power on the AC drive to view or modify
the parameters.
0 to 65535 0
FF.10
Restore default
setting of
parameters in the
level-III menu
0: No operation
1: Restore default setting of parameters in the level-III
menu
(not including F0.00 to F0.04, F0.16, F2.01, F2.11 and
FF.00)
2: Restore all parameters
0 to 2 0
FF.11
Level-III menu
parameters display
setting
0, Display all parameters in the level-III menu
1: Only display the parameters in the level-III menu that
are modied
0, 1 0
To Next Page
Loading...
Need help?
General