Rev. 2.0
Maintenance Guide
16-1
DANGER
To prevent any trouble caused by accidental machine start, always
shut-down the power before starting the maintenance and
adjustment work.
[16] FEEDER POSITION INDICATOR (FPI) (OPTIONAL)
16-1. Detaching the FPI (Front) (M and L Board Specifications)
As shown in the Figure below, the FPI is secured to the FPI bracket with the SEMS cap bolts (M6
× 12) that is secured to the FPI feeder float sensor bracket.
To detach the FPI, remove two bolts and slide it upward.
SEMS cap bolt
SEMS cap bolt
FPI unit F
Figure 16-1-1
To Next Page
Loading...
Need help?
General
