Rev. 2.0
Maintenance Guide
18-1
DANGER
To prevent any trouble caused by accidental machine start, always
shut-down the power before starting the maintenance and
adjustment work.
WARNING
Only certificated service engineers are allowed to replace the
movable cutter blade and fixed cutter blade.
[18] TAPE CUTTER (OPTIONAL)
18-1. Overall Drawing
This tape cutter unit is composed of a cutter main unit and discharge guides (upper discharge
guide/lower discharge guide).
For the machine with the fixed bank specifications, the upper discharge guide is connected to the
cutter unit. For the machine with the replacement table trolley specifications, the upper discharge
guide is mounted on the replacement table trolley. The same tape cutter and lower discharge
guide are used for the fixed bank and replacement table trolley specifications. However, the tape
cutter guide and upper discharge guide for the fixed bank specifications are different from those
for the replacement table trolley specifications.
Figure 18-1-1 Overall Drawing of Tape Cutter
Lower discharge guide
Upper discharge guide
Tape cutter guide
Fixed bank
specifications
Tape cutter main unit
Replacement table trolley
specifications
Tape cutter main unit
Lower discharge guide
Upper discharge guide
(Assembled into
replacement table
trolley.)
Tape cutter guide
To Next Page
Loading...
Need help?
General
