Rev. 2.0
Maintenance Guide
18-5
18-3. Replacing the Tape Cutter Blade
∗ Replace the cutter blade with the cutter unit detached from the mounter.
∗ For details how to detach the cutter unit from the main unit, see section 18-2.
<L and M Board Specifications>
1) Detach the lower discharge guide from the cutter main unit. (See section 18-2.)
2) Detach the tape cutter guide from the cutter main unit. (See section 18-2.)
3) Remove the cover mounting screws to detach the cover.
SL6040892TN
SCREW M4 L=8
40113935
CUTTER_COVER
4) Close the movable cutter blade, and then remove the set screws for adjustment of the
pushing pressure and the fixed cutter blade mounting screws (5 locations).
Detach the fixed cutter blade.
When loosening the screw, the cutter blade may turn in the wrench turning direction. So, be
careful not to get injured.
40110231
UPPER_BLADE_A
SM6051402TN
SCREW M5 L=14
E6109700000
UPPER_BLADE_BUSH
NM6040001SC
NUT M4
SM8041402TP
Set screw M4×14
To Next Page
Loading...
Need help?
General
