KTM 400 EXC EU 2011 User Manual

301ENGINE
RemDYinlllle enline
101
- Drain the coolant. (or p. 179)
-
Remove the carburetor. (or p. 163)
-
Remove the engine sprocket. (or p. 177)
-
Raise the motorcycle with the lift stand. (or p. 10)
-
Disconnect the negative cable from the battery.
-
Remove screws e. Remove the foot brake cylinder and allow it to hang tension-free
to the
side.
• Info
I The brake line connection does not need to be disconnected.
Do not kink the brake line. Do not damage the bellows on the foot brake
cylinder.
-
Detach spri ng • and take if off.
-
Prop up the rear wheel. Remove screw e.
- Remove nut e.
- Remove the swingarm pivot. Remove the swingarm, shock absorber and rear wheel
together.
• Info
I You should have an assistant for this step.
Make sure that the engine is sufficiently secured against falling over.
- Remove the main silencer. (or p. 62)
-
Remove screw •.
- Remove springs e and take off the manifold.
-
Release hose clips e. Take off the radiator hoses together.
-
Loosen hose clips e. Remove the radiator hoses together along with the thermo-
stat.
-
Pull engine vent hose e from the valve cover and engine case.
- Pull of the spark plug connector.
301ENGINE
RemDYinlllle enline
101
- Drain the coolant. (or p. 179)
-
Remove the carburetor. (or p. 163)
-
Remove the engine sprocket. (or p. 177)
-
Raise the motorcycle with the lift stand. (or p. 10)
-
Disconnect the negative cable from the battery.
-
Remove screws e. Remove the foot brake cylinder and allow it to hang tension-free
to the
side.
• Info
I The brake line connection does not need to be disconnected.
Do not kink the brake line. Do not damage the bellows on the foot brake
cylinder.
-
Detach spri ng • and take if off.
-
Prop up the rear wheel. Remove screw e.
- Remove nut e.
- Remove the swingarm pivot. Remove the swingarm, shock absorber and rear wheel
together.
• Info
I You should have an assistant for this step.
Make sure that the engine is sufficiently secured against falling over.
- Remove the main silencer. (or p. 62)
-
Remove screw •.
- Remove springs e and take off the manifold.
-
Release hose clips e. Take off the radiator hoses together.
-
Loosen hose clips e. Remove the radiator hoses together along with the thermo-
stat.
-
Pull engine vent hose e from the valve cover and engine case.
- Pull of the spark plug connector.

KTM 400 EXC EU 2011 Specifications

General

Brand	KTM
Model	400 EXC EU 2011
Category	Motorcycle
Language	English